RF RGB LED Strip Controller with 44-button remote control, 12A 12-24V

The RF radio-controlled RGB LED strip controller with 44 keys remote control allows mixing to the three individual colors of an RGB LED strip (red, green, blue) This way you can adjust the RGB LEDs in every possible color and save the settings.

Because controller is RF radio is controlled, it can also be controlled from another room and is not direction sensitive like infrared.

You connect a standard RGB LED strip to the controller with the universal 4-pin connector and a standard 12 volt adapter to the DC Jack plug input. Each channel can switch up to 4 amperes (12A maximum total); So you can control two of our brightest 5-meter RGB LED strips with 300 LEDs without any problem.
The controller has several built-in effects, beautiful color transitions and show effects. The 44 push buttons are used to quickly select a color, to mix colors or to choose an effect mode.

- Brightness / dimming
- On Off
- 20 preset colors and white
- Mixing and storing colors
- FLASH, changes color with quick transition
- STROBE, white or off.
- FADE, soft transitions between colors.
- SMOOTH, faster transitions through the colors.
- ...

contents
44 KEY RF remote control and an RGB led strip controller.

This RF controller is for use with an RGB ledstrip (see below)
Use a 12 or 24 volt DC adapter jack (see below)